ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system

Article-No.:
183813
Manufacturer-No.:
ACFRE00106A
EAN/GTIN:
4895213703383
WEEE Nummer
DE61101640
Technical specifications

General

Product Type
Processor liquid cooling system
Packaged Quantity
1

Heatsink & Fan

Fans Qty
2
Fan Diameter
140 mm
Fan Height
27 mm
Rotation Speed
200-1900 rpm
Air Flow
68.9 cfm
Compatible With
LGA2066 (Square ILM) Socket, LGA1200 Socket, LGA1156 Socket, LGA1152 Socket, LGA1700 Socket, Socket AM5, LGA1155 Socket, LGA1150 Socket, LGA1151 Socket, LGA2011-3 (Square ILM) Socket, Socket AM4
Power Connector
3-pin ARGB connector, 4-pin fan connector
Features
RGB Fusion 2.0, ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome RGB, Pulse-width modulation (PWM) support, Addressable RGB
Fan Bearing
Fluid dynamic bearing
Air Pressure
2 mm
Noise Level
0.3 Sone

Dimensions & Weight

Weight
1,6 kg

Dimensions & Weight (Shipping)

Shipping Width
15,5 cm
Shipping Depth
33,5 cm
Shipping Height
17 cm
Shipping Weight
2,117 kg

Service & Support

Type
6-year warranty

Miscellaneous

Color
Black
Color Category
Black
RGB
Description
  • Light up your build
    The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with A-RGB fans optimized for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
  • Efficient, in-house developed pump
    Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of 0.8 W at no load, 2.3 W under normal load and a maximum of 6.78 W under full load for the entire AiO, without illumination.
  • Premium class radiator
    Unlike most other all-in-one liquid cooling manufacturers, ARCTIC relies on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased. Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.
  • Smooth VRM fan
    The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
  • High quality hoses with integrated cable management
    The fiber-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating, so you don't have to worry about refilling the compact water cooling system. In addition, it hides both the A-RGB and PWM cables of your radiator fans thanks to a well thought-out cable management system. This way, you only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don't need to hide any more cables and your view is reduced to the essentials.
AlertBrowse fileDownload file