ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_thumb_3

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_thumb_4

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_thumb_5

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_1

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_2

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_3

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_4

ARCTIC Liquid Freezer II 280 A-RGB - processor liquid cooling system_5

Please login to see the price

Article-No.:

183813

Manufacturer-No.:

ACFRE00106A

EAN/GTIN:

4895213703383

Description

Light up your build
The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with A-RGB fans optimized for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
Efficient, in-house developed pump
Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of 0.8 W at no load, 2.3 W under normal load and a maximum of 6.78 W under full load for the entire AiO, without illumination.
Premium class radiator
Unlike most other all-in-one liquid cooling manufacturers, ARCTIC relies on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased. Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.
Smooth VRM fan
The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
High quality hoses with integrated cable management
The fiber-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating, so you don't have to worry about refilling the compact water cooling system. In addition, it hides both the A-RGB and PWM cables of your radiator fans thanks to a well thought-out cable management system. This way, you only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don't need to hide any more cables and your view is reduced to the essentials.

There is no liability or guarantee that all information is complete, correct and up to date at all times.