QNAP TL-R1620Sdc - hard drive array

QNAP TL-R1620Sdc - hard drive array_thumb_3

QNAP TL-R1620Sdc - hard drive array_thumb_4

QNAP TL-R1620Sdc - hard drive array_thumb_5

QNAP TL-R1620Sdc - hard drive array_thumb_6

Article-No.:

203452

Manufacturer-No.:

TL-R1620SDC

EAN/GTIN:

4713213519240

WEEE Nummer

DE90799723

Compare

Print view

Technical specifications

General

Packaged Quantity

Chassis

Built-in Devices

LED panel

Storage Controller

Interface Type

Serial ATA-600 / SAS 3.0

Hard Drive

Type

No HDD

Expansion Bays

16 (total) / 16 (free) x hot-swap - 2.5" / 3.5" shared

Power Device

Voltage Required

AC 100-240

Power Provided

550 Watt

Installed Qty

Max Supported Qty

Nominal Voltage

AC 120/230 V

Type

Internal power supply

Dimensions & Weight

Width

48,22 cm

Depth

42,53 cm

Height

13,13 cm

Miscellaneous

Features

Built-in 3 cooling fans, Audible alarm, S.M.A.R.T. support

Height (Rack Units)

Color Category

Black

Description

Featuring dual controllers, an OLED indicator, and a short-depth rackmount design, the 3U 16-bay TL-R1620Sdc SAS 12Gb/s storage expansion enclosure is ideal for expanding the storage capacity of dual-controller QNAP NAS. Both controllers have three Mini-SAS HD (SFF-8644) ports, supporting 12Gbps SAS and Broadcom SAS DataBolt bandwidth optimization technology. The dual path mini-SAS design sustains continuous operations even if an external JBOD cable is disconnected. Up to 7 TL-R1620Sdc units can be daisy-chained via high-speed Mini-SAS HD cables, providing scalability and high reliability for mission-critical storage of file servers, virtualization, surveillance, medium-sized data center, multimedia, and more.

Failure-resistant with a dual-controller, dual-path design
Connect the TL-R1620Sdc to a dual-controller QNAP NAS and create a redundant cross loop configuration that provides expansion units with redundant paths to the base NAS and protection between JBOD connections. If one or more paths to the TL-R1620Sdc disconnect, other expansion units can still communicate with the base NAS. This is essential for intermachine data protection and capacity scalability for uninterrupted mission-critical enterprise tasks.
Highly efficient, reliable and scalable
The TL-R1620Sdc is powered by a low-power 28nm SAS35x28R SAS Expander and supports 12/6 Gb/s SAS/SATA drives. Both controllers have three Mini-SAS HD (SFF-8644) ports, and each SAS wide port combines four SAS 12Gb/s channels for up to 48Gbps bandwidth.
Supports SAS DataBolt technology, delivers 12Gb/s speed using existing 6Gb/s infrastructure
Featuring Broadcom SAS DataBolt bandwidth optimization technology, the TL-R1620Sdc has an intelligent data buffer for transferring data to drives at speeds that match the performance of the host NAS. Whether the TL-R1620Sdc uses 12Gb/s or 6Gb/s drives, the NAS host will transfer data to the TL-R1620Sdc at 12Gb/s, allowing you benefit from high-speed 12Gb/s SAS transmission with existing 6Gb/s infrastructure.
Leverage the 6Gbps SAS to SATA drive adapter to install 2.5-inch SATA SSDs
While SATA 6Gb/s SSDs provide high-performance yet affordable storage, the lack of dual-port support makes them unsuitable for dual-controller environments. The QDA-SA2 adapter allows the use of a SATA 6Gb/s drive in a 3.5-inch SAS drive bay - providing the ability to expand storage capacity by using cost-effective SATA drives. By installing a SATA drive with the QDA-SA2 into the dual-controller TL-R1620Sdc, the SATA drive can share these SAS dual-port advantages to ensure a high-availability, fault-tolerant enterprise storage environment.

Documents

QNAP TL-R1620Sdc - hard drive array Brochure